Equipment

As well as our superior personnel, Strike Drilling’s strength lies in our top-of-the-line equipment. We can provide everything from drill rigs to trucks, and even fully managed remote camp facilities.

Drill Rigs

Products 1 to 7 of 7
    • SDR01 - Reverse Circulation / Water Well Drill Rig

      SDR01 - Reverse Circulation / Water Well Drill Rig

      Reverse Circulation Specifications:

      Model: LC36 (KWL 700)

      Year: 2013

      Capacity: Reverse Circulation - 775m with 4.5” drill pipe


      Water Well Specifications:

      Model: LC36 (KWL 700)

      Year: 2013

      Capacity: Water Well - 150mm (6”) hole to 775m up to 385mm (17.5”) hole to 280m


      Standard Strike Drilling Features:

      • Automatic remote controlled rod handling system
      • Rod retention system
      • 16” Slips table opening
      • FOPS on the drillers console
      • Mast Lock Mechanism
      • Secondary retention in place for mast components
      • All high-pressure anchor points rated to AS2741
      • Road registered with large 14R off-road tyres for better remote handling
      • Rotation Rod Safety cages
      • Engineer rated rig tooling
      • Real time data transfer capabilities from the drill rig
      • Modern Sampling system including a Cone/Riffle splitter
      • Department of Mines Inspected
      • BHP compliant

      Strike Drilling has complied the LC36 to be industry leaders in innovation and safety standards with Mercedes Actross 8x8 trucks to be road-registered vehicles for increased mobility, specializing in remote area access. Strike Drilling provide electronic safety and operational systems able to be accessed and utilized from the drill rig location anywhere in Australia for real time data collection allowing for immediate actions to be implemented.


    • SDR02 - Reverse Circulation / Water Well Drill Rig

      SDR02 - Reverse Circulation / Water Well Drill Rig

      Reverse Circulation Specifications:

      Model: LC36 (KWL 700)

      Year: 2013

      Capacity: Reverse Circulation - 775m with 4.5” drill pipe


      Water Well Specifications:

      Model: LC36 (KWL 700)

      Year: 2013

      Capacity: Water Well - 150mm (6”) hole to 775m up to 385mm (17.5”) hole to 280m


      Standard Strike Drilling Features:

      • Automatic remote controlled rod handling system
      • Rod retention system
      • 16” Slips table opening
      • FOPS on the drillers console
      • Mast Lock Mechanism
      • Secondary retention in place for mast components
      • All high-pressure anchor points rated to AS2741
      • Road registered with large 14R off-road tyres for better remote handling
      • Rotation Rod Safety cages
      • Engineer rated rig tooling
      • Real time data transfer capabilities from the drill rig
      • Modern Sampling system including a Cone/Riffle splitter
      • Department of Mines Inspected
      • BHP complianent

      Strike Drilling has complied the LC36 to be industry leaders in innovation and safety standards with Mercedes Actross 8x8 trucks to be road-registered vehicles for increased mobility, specializing in remote area access. Strike Drilling provide electronic safety and operational systems able to be accessed and utilized from the drill rig location anywhere in Australia for real time data collection allowing for immediate actions to be implemented.


    • SDR03 - Reverse Circulation / Water Well Drill Rig

      SDR03 - Reverse Circulation / Water Well Drill Rig

      Reverse Circulation Specifications:

      Model: LC36 (KWL 700)

      Year: 2013

      Capacity: Reverse Circulation - 775m with 4.5” drill pipe


      Water Well Specifications:

      Model: LC36 (KWL 700)

      Year: 2013

      Capacity: Water Well - 150mm (6”) hole to 775m up to 385mm (17.5”) hole to 280m


      Standard Strike Drilling Features:

      • Automatic remote controlled rod handling system
      • Rod retention system
      • 16” Slips table opening
      • FOPS on the drillers console
      • Mast Lock Mechanism
      • Secondary retention in place for mast components
      • All high-pressure anchor points rated to AS2741
      • Road registered with large 14R off-road tyres for better remote handling
      • Rotation Rod Safety cages
      • Engineer rated rig tooling
      • Real time data transfer capabilities from the drill rig
      • Modern Sampling system including a Cone/Riffle splitter
      • Department of Mines Inspected
      • BHP complianent

      Strike Drilling has complied the LC36 to be industry leaders in innovation and safety standards with Mercedes Actross 8x8 trucks to be road-registered vehicles for increased mobility, specializing in remote area access. Strike Drilling provide electronic safety and operational systems able to be accessed and utilized from the drill rig location anywhere in Australia for real time data collection allowing for immediate actions to be implemented.


    • SDR04 - Aircore / Reverse Circulation Drill Rig

      SDR04 - Aircore / Reverse Circulation Drill Rig

      Extreme Remote Capabilities

      Model: X350

      Year: 2014

      Capacity: 300m with 3.5” drill pipe AC/RC


      Standard Strike Drilling Features:

      • Mounted on a VD3000 Morooka track base
      • Automatic rod handling system
      • 6m drill rods
      • Hands free Maker Breaker system
      • Secondary retention in place for mast components
      • All high-pressure anchor points rated to AS2741
      • Rotation Rod Safety cages
      • Engineer rated rig tooling
      • Real time data transfer capabilities from the drill rig
      • Modern Sampling system including a Cone/Riffle splitter 

      The X350 drill platform is mounted on a VD3000 Morooka track base. This combination provides an industry-leading product that allows Strike Drilling to supply clients with a reduced environmental footprint (4 psi ground pressure) and extreme remote accessibility with its wide rubber tracks. The rig is supported by a track based water fuel platform. The large 400psi/1240cfm onboard compressor coupled with the 3 ½” drill string will provide improved sample quality with the AC blade and allow a larger hammer to be utilized for increased penetration through harder formations.


    • SDR05 - Aircore / Reverse Circulation

      SDR05 - Aircore / Reverse Circulation

      Extreme Remote Capabilities

      Model: X350
      Year: 2015
      Capacity: 300m with 3.5” drill pipe AC/RC


      Standard Strike Drilling Features:

      • Mounted on a VD3000 Morooka track base
      • Automatic rod handling system
      • 6m drill rods
      • Hands free Maker Breaker system
      • Secondary retention in place for mast components
      • All high-pressure anchor points rated to AS2741
      • Rotation Rod Safety cages
      • Engineer rated rig tooling
      • Real time data transfer capabilities from the drill rig
      • Modern Sampling system including a Cone/Riffle splitter 

      The X350 drill platform is mounted on a VD3000 Morooka track base. This combination provides an industry-leading product that allows Strike Drilling to supply clients with a reduced environmental footprint (4 psi ground pressure) and extreme remote accessibility with its wide rubber tracks. The rig is supported by a track based water fuel platform. The large 400psi/1240cfm onboard compressor coupled with the 3 ½” drill string will provide improved sample quality with the AC blade and allow a larger hammer to be utilized for increased penetration through harder formations.


    • SDR06 - Aircore/Reverse Circulation

      SDR06 - Aircore/Reverse Circulation

      Small Footprint, Large capacity and Mobile 

      Model: Schramm T450
      Year: 2017
      Capacity: 300m with 3.5” drill pipe AC/RC


      Standard Strike Drilling Features:

      Mounted on a registered 6x6 Mercedes Actross
      Automatic rod handling system
      6m drill rods
      Hands free Maker Breaker system
      Secondary retention in place for mast components
      All high-pressure anchor points rated to AS2741
      Rotation Rod Safety cages
      Engineer rated rig tooling
      Down hole survey winch
      Real time data transfer capabilities from the drill rig
      Modern Sampling system including a Cone/Riffle splitter 


      The T450 drill platform is mounted on a new Mercedes 6x6 for greater mobility. The rig design is based on our popular X350 design with a large 400psi/1240cfm onboard compressor coupled with the 3 ½” drill string will provide improved sample quality with the AC blade and allow a larger hammer to be utilized for increased penetration through harder formations. The RC capacity has been proven to depths of 300m while still maintaining a small environmental footprint. The T450 was built to service clients with environmental restrictions on a wide spread drill program.


    • SDR07 - Aircore/Reverse Circulation

      SDR07 - Aircore/Reverse Circulation

      Small Footprint, Large capacity and Mobile 

      Model: Schramm T450
      Year: 2017
      Capacity: 300m with 3.5” drill pipe AC/RC


      Standard Strike Drilling Features:

      Mounted on a registered 6x6 Mercedes Actross
      Automatic rod handling system
      6m drill rods
      Hands free Maker Breaker system
      Secondary retention in place for mast components
      All high-pressure anchor points rated to AS2741
      Rotation Rod Safety cages
      Engineer rated rig tooling
      Down hole survey winch
      Real time data transfer capabilities from the drill rig
      Modern Sampling system including a Cone/Riffle splitter 


      The T450 drill platform is mounted on a new Mercedes 6x6 for greater mobility. The rig design is based on our popular X350 design with a large 400psi/1240cfm onboard compressor coupled with the 3 ½” drill string will provide improved sample quality with the AC blade and allow a larger hammer to be utilized for increased penetration through harder formations. The RC capacity has been proven to depths of 300m while still maintaining a small environmental footprint. The T450 was built to service clients with environmental restrictions on a wide spread drill program.


    Products 1 to 7 of 7

      We’re looking to offer the broadest range of drilling options for our clients, who know that when they call us we might not be the cheapest but our service will be unmatched, and the results unbeatable in the long run.

      We are willing and able to change drilling methods to suit a particular campaign, and posses the capabilities to operate in the most extreme of exploration areas.

      Strike Drilling runs a fleet of Mercedes trucks so we have continuity of parts and servicing, and proven all-wheel drive vehicles. Our rigs are high quality machines that we’ve worked with previously, and happily purchased once again.

      Get In Touch